Metallic tanks

Functioning principle

Metallic tanks for fuel

 Underground horizontal cylindrical tanks for liquid fuel:

 Liquid fuel is introduced in the tank through the inlet connection (R1).

 Removal of fuel for use is done via the outlet (R2).

 Complete evacuation of the tanks content for maintenance and cleaning purposes takes place through the outlet connection (R3).

 Removing the over pressure or vacuum from the area above the liquid is done through the vent connection (R4). On this connection a flame retardant is installed.

 Following the liquid level variation from the tank can be made through the level indicator mounted on the connection (R5).

 Personnel access into the interior of the tank, to make maintenance or control work can me made through the tank's visiting mouth (R6). To ease access in case of tanks bigger than 1000 liters, a metal ladder is mounted close to the visiting area of the tank. Double layered underground horizontal cylindrical tanks for liquid fuel:

 The liquid fuel is introduce in the tank through the discharge connection (R2)

 Removing the fuel to use is made through aspiration (R1)

 Removing over pressure pr vacuum from the area above the liquid is made through the venting connection (R3). On this connection, flame retardant is installed.

 Following the variation in the level of the liquid can be made with the indicator mounted on the connection (R4).

 Personnel access into the tank to do maintenance and control work can be done through the manhole (R5) 

 Leakage detection is made by connecting the detector to the compartment between the inner and the outer wall via the R6 connectors.

 Vertical ground cylinder tanks:

 The liquid load is introduced in the tank through the inlet connection (R1)

 Removing the liquid from the tank for use is done through the outlet connection (R2).

 The full tank evacuation of the content due to cleaning or maintaining takes place through the outlet connection (R3)

 Removing the over pressure or of the vacuum from above the liquid is made through the venting connection (R4). On this connection a flame retardant is installed.

 Personnel access inside the tank to make maintaining and control work can be made through a manhole (R5)

 To ease access in tank bigger than 1000 liters, a ladder is mounted on the outside and inside of the manhole.

 Rectangular ground tanks:

 

 Liquid load is introduced in the tank through the inlet connection (R1).

 Removing the liquid from the tank for use is done via the outlet (R2).

 Complete evacuation of the tank's content in order to do maintenance and cleaning takes place through the outlet connection (R4).

 Removing over pressure or vacuum from the area above the liquid is made through the venting connection (R3). A flame retardant is installed on this connection.

 Personnel access inside the tank to make maintaining and control work can be done through a manhole (R6).

 For double layer variants, there is a connection (R7) where into which the leak detecting fluid and the connection are introduced (R5), which serves to evacuate it.

 

Field of use

Metallic tanks are used in all field of activities where materials are stored in the liquid state of aggregation.

SC CALORSET SRL Carei horizontal offers cylindrical tanks, under or on the ground, with simple or double layers, vertical cylindrical tanks, rectangular tanks, placed on the exterior or the interior of the buildings, made out of stainless steel or carbon steel to deposit liquid petroleum products, food liquids, drinking water, industrial water and different liquid chemicals. The contained liquids can be under pressure or at atmospheric pressure, at ambient temperature or high temperatures. 

Advantages:

 

 Tanks to deposit inflammable and non flammable liquids that pollute the water, are executed in compliance with the European norms SR EN 12285-1 and SR EN 12285-2;

 - having a simple and robust construction, it provides maximum safety and reliability in running and minimal maintenance costs.

 - wall thickness is calculated with corrosion allowance for a lifetime of at least 20 years.

 - not having moving parts, does not require wear parts;

 - cleaning, maintaining and interior inspection are much easier by properly scaling the dimensions of the access holes; 

 - underground tanks are built with double layers to to avoid accidental liquid leakage which can pollute the environment

 - the space between the two layers of the tank is permanently monitored through a warning system with an electric circuit that allows the immediate sensing the leakage of the inner wall of the tank;   

 - underground tanks, being located below the surface of the ground, does not occupy the above-ground space in the location area;

 - above ground tanks have all the area visible, allowing the permanent visual control of its state;

 - stainless steel tanks are resistant to corrosive agents for a longer period of time without the addition of corrosion to the thickness of the walls;

 - tanks made out of stainless steel for food purposes allow the storage of drinking water and food liquids without the risk of alteration;

 - tanks can be built in variable configurations, at different sizes, from different metallic materials, respectively with paint coatings or metallic coatings, depending on the concrete needs of the beneficiary; 

 - for inspection of the technical condition, cleaning and maintenance, the tanks are provided with corresponding access holes, stairs, access platforms with railings, etc .;

 

Charactersitics

 

S.C. CALORSET S.R.L. Carei offers tanks with scaling characteristics and functional parameters as requested by the beneficiaries.

The dimensions of the current manufacture are those in the tables below.

Horizontal overhead cylinders for liquid fuel:

Request the scaling of the metallic tank and the price offer

You will receive possible a questionnaire as soon as with the necessary data.

 

* Note: At client's request, it can be executed outside the above-mentioned dimensions and produced with other functional parameters or other dimensional features.

 

 

Double-layered horizontal cylindrical horizontal tank for liquid fuel:

 

 

* Note: At client's request, it can be executed outside the above-mentioned dimensions and produced with other functional parameters or other dimensional features.

 

 

Vertical above ground cylindrical tanks:

 

 

* Note: At client's request, it can be executed outside the above-mentioned dimensions and produced with other functional parameters or other dimensional features.

 

 

Above ground rectagular tanks:

 

 

* Note: At client's request, it can be executed outside the above-mentioned dimensions and produced with other functional parameters or other dimensional features.

 

CALORSET SRL​ , 

Str. Uzinei nr. 60 , Carei, 445100,  Romania

Tel.  0040261861220  

Fax. 0040261861221 

GSM. 0040744816294

office@calorset.com